Installing the Services Fee is very simple. The following steps will guide you through the process:

1-  Upload the entire folder to your website - if you experience problems, try uploading in binary mode. However, do not upload the “upload” folder, just the files inside of it!
2- Login to the admin area, go to Configuration > System Settings > Addon Modules
3- In the addon modules page, you will see the Services Fee. Click activate, then click configure to see the options
Check the Full Administrator box in the Access Control, then click Save Changes
4- You can access your module at 'Addons' → ‘Services Fee you setup everything you need.

Remember: After upgrading, your browser may still display cached versions of the previous files. So if you get any display issues or inconsistencies, always try clearing your cache first, both in your browser, and the WHMCS templates cache (templates_c folder files)

Lang: To change the small fee word, please go to lang files at \modules\addons\servicesfee\lang or modules\addons\servicesfee\lang\overrides

When you do a test make sure that you do not login as admin. Logout and test the module as a client

Version: 3.4.1 Released (01/11/2024)
Maintenance

Fixed support for ionCube Loader v13
Updated work with Licence System
Updated Improve ionCube Loader
Updated Remove Support for WHMCS V8.4.x to 8.6.x

Version: 3.4.0 Released (10/02/2023)
Minor

Added Add Fund Option
Added You can choose individual products or all products
Updated Compatibility with WHMCS 8.8.x.
Updated Remove Support for WHMCS V8.4.x to 8.5.x
Fixed Stripe and cart error
Fixed PayPal recurring invoices
Fixed Other minor appearance

Version: 3.3.6 Released (05/15/2023)
Maintenance

Updated old database queries
Fixed PayPal button code

Version: 3.3.5 Released (01/23/2023)
Maintenance

Fixed issue with WHMCS V8 checkout
Fixed Problem with using credit
Fixed Problem with tab changes
Fixed Skip Old Invoices
Fixed Display Calculated Rates For Chosen Gateways
Fixed Issue with client language in invoices
Fixed Invoice Free Duplication
Fixed support for ionCube Loader v12 and PHP 8.1
Updated Remove Support for PHP 7.1 to 7.3
Updated Remove Support for WHMCS V8.1.x to 8.3.x

Version: 3.3.4 Released (05/27/2021)
Maintenance

Added Auto Updated On Module
Updated About Page
Updated Remove Support Update

Version: 3.3.3 Released (10/06/2020)
Maintenance

Fixed New PayPal
Fixed to work with WHMCS V8.0 and PHP 7.4 support
Updated Remove v4 Admin theme from distribution
Updated Remove Support for PHP 5.6 to 7.0

Version: 3.3.2 Released (12/30/2018)
Maintenance

Fixed funds changes to  fees inclusive

Version: 3.3.1 Released (07/08/2018)
Maintenance

Fixed Configuration saving problem
Fixed SwiftModders Themes
Fixed excluding clients on the checkout page

Version: 3.3.0 Released (01/08/2018)
Stable

Updated Module name change to Services fee
Fixed Problem with PHP 7.x
Fixed Invoice does not pay with credit
Fixed Services fee deleted from canceled invoices
Added Spanish lang file

Version: 3.2.1 Released (03/11/2017)
Maintenance

Fixed PayPal Subscriptions
Fixed CDN js files not loaded
Fixed Minimum total problem
Added multi-currency to multi-country

Version: 3.2.0 Released (20/10/2017)
Minor

Added Multi-currency added with a new way (fee per currency)
Added whmcsservices help information

Version: 3.1.4 Released (01/10/2017)
Maintenance

Fixed convert currency

Version: 3.1.3 Released (08/28/2017)
Maintenance

Fixed convert currency

Version: 3.1.2 Released (02/08/2017)
Maintenance

Bug fixes and other minor improvements

Version: 3.1.1 Released (01/08/2017)
Maintenance

Update apply Tax for the fees charged
Fixed upgrade orders redirect

Version: 3.1.0 Released (06/25/2017)
Minor

Fixed Currency symbol as the number
Fixed Auto delete client data when a client is deleted
Added Fee Billing Type feature
Added Fee calculator function

Version: 3.0.3 Released ( 06/11/2017 )
Maintenance

Fixed fee calculator function
Fixed Multi-currency display

Version: 3.0.2 Released ( 06/09/2017 )
Maintenance

Fixed Multi-currency display problem
Fixed License checking section reviewed to speed

Version: 3.0.1 Released (01/06/2017)
Maintenance

Fixed Problem with WHMCS 7.2.2
Fixed Mistake Currency problem
Fixed Exclude Clients page

Version: 3.0 Released (05/26/2017 )
Stable

Added Set different fees for each country
Added Set Minimum invoice total to add fee
Added Allow to Apply fee after taxing or before taxing
Added You exclude clients from the gateway fee
Added Recode module from scratch
Fixed PayPal Recurring Payments
Updated Ajax edit gateway fee

Version: 2.1 Released (02/12/2017)
Minor

Updated Improve the license call
Fixed Hooks have been recoded to fix some issues with a tax on an invoice

Version: 2.0 Released (01/21/2017)
Stable

Fixed Applying a discount to an invoice does not work
Fixed Credit is not effective on invoices
Added Percentage + Fixed Fee can now be used independently

First, I want to thank you very much for being a user of our Product Limiter. We hope you are finding it useful for your business.

We have merged WS Products Limiter with WS Client Limitation. We are taking this action because these two modules do almost the same functions. WS Client Limitation has added Product/Services Limitation; now no reason we should have both if they do the same. That way, we have just one module.

Make a Full Backup
We cannot stress enough how important it is to always take a full backup before attempting any kind of upgrade/install. Both for WHMCS as well as for any other software you use. A full backup should be taken of both the WHMCS files as well as the database.

Before you deactivate the module, please wait for the second email you get.

Then you first, deactivate the Product Limiter module and remove/delete WS Product Limiter.

Second, login to your client area and download the WS Client Limitation; install it and add the key.

This applies only to people who have both WS Client Limitation & WS Products Limiter:

We can change it to any WS Module comparable in the price range, no greater than $31.99.

Please visit my site at https://www.whmcsservices.com to see all the modules you can choose from. Once you have the one you like (costing no more than $31.99), please email me at licensing@whmcsservices.com with the module you like. If you have the source codes, then no exchange of this module -- sorry. You need to respond within 72 hours before the license system is turned off.

Also, for those who have the module already, I give you a 2-year Support/Update FREE! After those 2 years, it sends an invoice to you for renewal. It will be $19.99 for the year. After payment, you will continue to receive support and updates on our module releases. If you do not want to continue, you can email us to cancel the invoice - Optional Renewal.

Installing Client Limitation is very simple. The following steps will guide you through the process:

1) Upload the entire folder to your website - if you experience problems, try uploading in binary mode. However, do not upload the “upload” folder, just the files inside of it!
2) Login to the admin area, go to Configuration > System Settings > ADDON MODULES
3) In the addon modules page, you will see the Client Limitation click activate, then click configure to see the options
4) You can access your module at 'Addons' → ‘Client Limitation then you setup everything you need.

Version: 6.1.0 Released (03/18/2025)
Minor

Added Payment Limit
Updated support for ionCube Loader v14 & PHP 8.3
Updated Licence System
Updated Remove Support for WHMCS V8.8.x * 8.9.x
Updated Remove Support for PHP 7.4

Version: 6.0.1 Released (07/16/2024)
Maintenance

Added the terminated service to the count; it was only counting for fraud, and canceled only
Fixed invoice amount value error, which is showing at the time of user registration with the checkout form.
Fixed an error that comes when the product group limit is reached, and again trying to add an order from that product group
Fixed the issue that does not allow users to add more orders if they have a status of Fraud, canceled, or terminated
Fixed the counting, which is showing in the error validation message after reaching the limit for the product group

Version: 6.0.0 Released (06/30/2024)
Stable

Added Products: You can define the maximum number of Products Active in that Client and the maximum number of Products in the Cart
Added Products: You can define the maximum number of product groups active in that Client and the maximum number of Groups in the Cart
Added Products: Option where you can select if you wanna count the Fraud and Cancelled orders, at the check
Updated Remove Support for WHMCS V8.7.x

Version: 5.0.4 Released  (03/13/2024)
Maintenance

Fixed Support WHMCS 8.9
Updated Menu

Version: 5.0.3 Released  (01/08/2024)
Maintenance

Fixed Issue with saving account rights
Fixed support for ionCube Loader v13
Updated work with Licence System
Updated Improve ionCube Loader
Updated Remove Support for WHMCS V8.4.x to 8.6.x

Version: 5.0.2 Released (12/02/2022)
Maintenance

Fixed support for ionCube Loader v12 and PHP 8.1

Version: 5.0.1 Released (10/27/2022)
Maintenance

Fixed Issue with saving account rights
Updated Remove Support for PHP 7.2 to 7.3
Updated Remove Support for WHMCS V8.1.x to 8.3.x

Version: 5.0.0 Released (10/17/2022)
Stable

Added limit clients to certain payment gateways
Added Mass terminate/suspend client services
Added send email notification
Added Cancel invoices
Added Sticky Notes
Fixed Issues with PHP 7.x
Fixed Issues with PHP 8.1

Version: 4.0.0 Released (11/24/2021)
Stable

Added Full Restriction (All Pages)
Added Full Restriction (Exclude invoice pay)
Added Restriction Support Tickets
Updated whmcsservices About Page
Updated whmcs.json
Fixed Problem with redirection

Version: 3.0.2 Released (09/29/2020)
Maintenance

Updated to work with WHMCS V8.0 and PHP 7.4 support
Updated Remove v4 Admin theme from distribution
Updated Remove Support for PHP 5.6 to 7.0
Updated Remove WHMCS 7.1.x to 7.10

Version: 3.0.1 Released (20/04/2018)
Maintenance

Fixed to work PHP 7.1 and PHP 7.2

Version: 3.0.0 Released (06/11/2017)
Stable

Added Prevent client from reopening closed ticket from the client area.
Added Display notification of the account limitation in admin area -> Clients Summary
Added whmcsservices Help Center
Fixed Auto Deleting when the client logged

Version: 2.0.0 Released (22/11/2016)
Stable

Added Clients total unpaid invoice value must be less than the setting value (0 = disabled)
Added Provide a reason why a client is limited
Added Set expiry date of when limitation should automatically be lifted

Version: 1.0.0 Released (26/08/2016)
Stable

New Initial Release

Installing the Login Verify Pin is very simple. The following steps will guide you through the process:

1) Upload the entire folder to your website - if you experience problems, try uploading in binary mode. However, do not upload the “upload” folder, just the files inside of it!
2) Login to the admin area, go to Configuration > System Settings > ADDON MODULES
3) In the addon modules page, you will see the Login Verify Pin click activate, then click configure to see the options
Check the Full Administrator box in the Access Control, then click Save Changes
4) To see who your client setup the PIN to go to Addons > Login Verify Pin

For v8.x and newer versions, the menu item will be added to the client area automatically, and to change the text displayed on the menu item, please check the language file $_ADDONLANG['page_title'] and set this to your own preference.

Remember: After upgrading, your browser may still display cached versions of the previous files. So if you get any display issues or inconsistencies, always try clearing your cache first, both in your browser, and the WHMCS templates cache (templates_c folder files)

When you conduct a test, ensure that you do not log in as admin. Logout and test the module as a client

Version: 3.3.4 Released (02/21/2025)
Maintenance Release

Fixed Support WHMCS 8.11.x & 8.12.x
Fixed Licence System
Fixed PHP 8.3
Updated Remove Support for PHP 7.4
Updated Improve ionCube Loader 14

Version: 3.3.3 Released (02/11/2024)
Maintenance Release

Fixed Support WHMCS 8.9 / 10.x
Updated Help Page

Version: 3.3.2 Released (01/12/2024)
Maintenance Release

Fixed support for ionCube Loader v13
Updated work with Licence System
Updated Improve ionCube Loader
Updated Remove Support for WHMCS V8.4.x to 8.6.x

Version: 3.3.1 Released (03/29/2023)
Maintenance Release

Fixed support for ionCube Loader v12 and PHP 8.1
Updated Remove Support for PHP 7.1 to 7.3
Updated Remove Support for WHMCS V8.1.x to 8.3.x

Version: 3.3.0 Released (12/06/2021)
Minor Release

Added Access Logs in Admin Area with the ability to delete individual ones
Added Access Logs in the Client Area
Added Automatically challenge a client by sending a code to their email address if their IP changed since last successfully logging in using Login Verify Pin
Added The unlock button will now remove a challenge from a clients account
Improvement Only show unlock button when the client's pin is either locked or challenged
Improvement Renamed 'mod_loginverifypin' database table to 'ws_loginverifypin'
Improvement Renamed the '{triesleft}' placeholder in the language file to '{failedattempts}' for better understanding of what it does
Fixed 'count(): Parameter must be an array or an object' bug in hooks.php
Fixed 'TypeError: Argument 2 passed to sendMessage() must be of the type int, null give' bug in loginverifypin.php

Version: 3.2.1 Released (11/11/2020)
Maintenance Release

Fixed Problems with WHMCS v8
Fixed Contacts login
Updated Remove v4 Admin theme from distribution
Updated Remove Support for PHP 5.6 to 7.0

Version: 3.2.0 Released (7/30/2019)
Minor Release

Added New menu and about pages
Added Don't Force after register
Updated WS prefix added to Email Template
Updated License code
Updated Apps & Integrations
Fixed Locked email not sending

Version: 3.1.0 Released (13/05/2018)
Minor Release

Fixed Hidden the pin number
Fixed the Mozilla Firefox browser problem
Added Sub Contact pin
Added WHMCSServices help page
Updated WHMCS default menu
Updated Filter/search option

Version: 3.0.2 (28/08/2017)
Maintenance Release

Fixed redirect problem resolved on some pages

Version: 3.0.1 (16/06/2017)
Maintenance Release

Updated New license codes added
Fixed Conflict problem with the Phone Verification module

Version: 3.0 Released (01/06/2017)
Stable

Added PIN forget recovery
Added Ajax searching on clients
Added 3 new email templates
Added Auto delete from verify pin table when deleting client feature
Updated Admin Area module main page reviewed and redesigned
Updated All forms and buttons changed to html5 and bootstrap
Updated PHP 7 and WHMCS 7.2
Fixed Use the first digit as a zero problem

Version: 2.2 Released (15/10/2016)
Minor Release

Updated WHMCS V7 support
Updated Improve License Check
Fixed Force the pin page to use ssl

Version: 2.1 Released (24/11/2015)
Minor Release

Updated Pins are MD5 hashed in the database
Fixed Conflict between Force set pin and Optional Pin

Version: 2.0 Released (14/11/2015)
Stable

Fixed Admin no longer needs to enter a pin to access customers' account
Added Force Set Pin on the first Login
Added Improved allowed pages to work when login verify pin is locked
Updated Improved License System Updated

Installing UptimeStatus is very simple. The following steps will guide you through the process:

1 - Upload the entire folder to your website - if you experience problems, try uploading in binary mode. However, do not upload the “upload” folder, just the files inside of it!
2 - Login to the admin area, go to Configuration > System Settings > General > ADDON MODULES
3 - In the addon modules page, you will see the Uptime Status. Click activate, then click configure to see the options
4 - If you use uptimedoctor.com or hyperspin.com then see #5
5 - The URL to your uptimedoctor.com or hyperspin.com RSS Feed.

6 - You can access your module at 'Addons' → ‘Uptime Status’
7 - Client can see the UptimeStatus at the client area or go to Network Status and see Uptime Status on the Top left side

NOTE: For v8.x and newer versions, the menu item will be added to the client area automatically, and to change the text displayed on the menu item, please check the language file $_ADDONLANG['page_title'] and set this to your own preference

Version: 1.4.6 Released (05/06/2025)
Maintenance

Fixed Support WHMCS 8.12.x & 13.x
Fixed Support PHP 8.3
Updated Remove Support for WHMCS V8.10.x
Updated Improve ionCube Loader 14.x

Version: 1.4.5 Released (10/31/2024)
Maintenance

Fixed Support WHMCS 8.10.x & 11.x
Fixed Support PHP 8.2
Updated Remove Support for WHMCS V8.7.x to 8.9.x

Version: 1.4.4 Released (06/12/2024)
Maintenance

Fixed Support WHMCS 8.9
Updated Help Page

Version: 1.4.3 Released (06/12/2024)
Maintenance

Fixed support for ionCube Loader v13
Updated work with Licence System
Updated Improve ionCube Loader
Updated Remove Support for WHMCS V8.4.x to 8.6.x

Version: 1.4.2 Released (06/12/2024)
Maintenance

Fixed support for ionCube Loader v12 and PHP 8.1
Updated Remove Support for PHP 7.1 to 7.3
Updated Remove Support for WHMCS V8.1.x to 8.3.x
Updated About Page

Version: 1.4.1 Released (10/06/2020)
Maintenance

Fixed Problem with WHMCS V8
Updated Remove v4 Admin theme from distribution
Updated Remove Support for PHP 5.6 to 7.0

Version: 1.4.0 Released (10/26/2018)
Minor Release

Added Pinguzo.com

Version: 1.3.1 Released (04/04/2018)
Maintenance

Fixed PHP 7.1 and PHP 7.2
Fixed to work with WHMCS 7.5

Version: 1.3.0 Released (21/10/2017)
Minor Release

Added updated WHMCSSERIVCES help page
Added Client Area Widget
Updated Improve code

Version: 1.2.0 Released (10/10/2016)
Minor Release

Updated WHMCS V7 support
Updated Improve License Check

Version: 1.1.0 Released (17/05/2016)
Minor Release

Fixed Show all uptime status in a client area
Updated Limit the number of uptime status shown

Version: 1.0.0 Released (10/05/2016)
Stable

New Initial Release

1 - Upload the entire files to your WHMCS root directory - if you experience problems, try uploading in binary mode
2 - Login to admin area go to Configuration > System Settings > ADDON MODULES
3 - In the addon modules page you will see the Email Auto Authorization click activate then click configure to see the options

4 - The module works with Invoices, Products, Domain, and Quote Delivery email templates to add the Auto Authorization Link. See the available merge fields; you will find 2 custom fields {$authorization_link} and {$authorization_html}. You can use any one of them

https://www.whmcsservices.com/images/EmailAutoAuth2.png

If you made any custom changes to these template files, you will need to make these changes again inside the new template file. These templates are based on the default template in 8.x.

Remember: After upgrading, your browser may still display cached versions of the previous files. So if you get any display issues or inconsistencies, always try clearing your cache first, both in your browser, and the WHMCS templates cache (templates_c folder files)