Version: 1.0.5 Released (08/12/2026)
Maintenance

Fixed: Admin side header menus with Blend Preview
Fixed: Menu controller log issue
Fixed: Support for PHP 8.3
Changed: Support WHMCS 13.x & 9.x
Changed: The License System
Removed: Support for WHMCS V8.10 to 8.12

Version: 1.0.4 Released (03/06/2025)
Maintenance

Fixed: Support for ionCube Loader v14
Fixed: Support for PHP 8.1 & 8.2
Changed: Support WHMCS 11.x & 12.x
Removed: Support for PHP 7.4
Removed: Support for WHMCS V8.4 to 8.9

Version: 1.0.3 Released (04/21/2024)
Maintenance

Added Icon Of Mobile Device Only
Fixed Menu Target
Fixed Support WHMCS 8.9/10.0
Updated Help Page
Updated the License System
Updated Improve ionCube Loader

Version: 1.0.2 Released (01/23/2024)
Maintenance

Fixed support for ionCube Loader v13
Updated Licence System
Updated Improve ionCube Loader

Version: 1.0.1 Released (11/25/2022)
Maintenance

Fixed Support PHP 8.1
Fixed Fixed Error report on lang
Updated Remove Support for PHP 7.2 to 7.3
Updated Remove Support for WHMCS V8.2 to 8.3

Version: 1.0.0 Released (04/23/2021)
Stable

New Initial Release

Installing MailerSend is very simple. The following steps will guide you through the process:

1) Upload the entire folder to your website - if you experience problems, try uploading in binary mode. However, do not upload the “upload” folder, just the files inside of it!
2) Login to the admin area, go to Configuration > System Settings > ADDON MODULES
3) In the addon modules page, you will see the MailerSend click activate, then click configure to see the options
4) Activate the API tokens Click here, then click on Integrations
5) Check the Full Administrator box in the Access Control, then click Save Changes
6) You can access your module at 'Addons' → 'MailerSend'
7) Navigate to Configuration > System Settings > General > Mail
8) Click the Configure Mail Provider button
9) Choose MailerSend from the available dropdown list

Version: 2.0.3 Released (03/06/2026)
Maintenance

Fixed: License System
Fixed: PHP error

Version: 2.0.2 Released (01/26/2026)
Maintenance

Updated Support WHMCS 8.13.x & 9.0
Updated Improve Licence System
Removed Remove Support for WHMCS V8.10 to 8.11

Version: 2.0.1 Released (03/06/2025)
Maintenance

Changed: Licence System
Changed: work WHMCS 11.x & 12.x

Version: 2.0.0 Released (12/01/2024)
Stable

Added Email Verification
Added Transactional SMS
Added Daily request quota
Added Support PHP 8.3
Added Ioncube 14 Support
Removed Remove Support for PHP 7.4
Removed Remove Support for WHMCS V8.7 to 8.9
Fixed BCC

Version: 1.0.3 Released (01/04/2024)
Maintenance

Fixed support for ionCube Loader v13
Updated work with Licence System
Updated Improve ionCube Loader
Updated Remove Support for WHMCS V8.4 to 8.6

Version: 1.0.2 Released (12/02/2022)
Maintenance

Fixed Support PHP 8.1
Updated Remove Support for PHP 7.2 to 7.3
Updated Remove Support for WHMCS V8.2 to 8.3

Version: 1.0.1 Released (03/18/2022)
Maintenance

Added API daily quota over error

Version: 1.0.0 Released (10/08/2020)
Stable

New Initial Release

Installing Country Restrictions is very simple. The following steps will guide you through the process:

1) Upload the entire folder to your website - if you experience problems, try uploading in binary mode. However, do not upload the “upload” folder, just the files inside of it!
2) Activate the module in WHMCS via the Setup >> Addon Modules screen. You will see the Country Restrictions click activate, then click configure to see the options

3) Check the Full Administrator box in the Access Control, then click Save Changes
4) You can access your module at 'Addons' → 'Country Restrictions'

Version: 1.1.4 Released (03/19/2026)
Maintenance

Fixed: License System
Fixed PHP Error
Fixed Support WHMCS 8.13 & 9.0.2
Updated Remove Support for WHMCS V8.7.x to 8.11.x
Updated: Remove Support for PHP 7.4

Version: 1.1.3 Released (03/29/2024)
Maintenance

Fixed Support WHMCS 8.9 & 8.10
Fixed support for ionCube Loader v13 and PHP 8.1
Updated Remove Support for WHMCS V8.4.x to 8.6.x

Version: 1.1.2 Released (01/04/2024)
Maintenance

Fixed support for ionCube Loader v13
Updated Licence System with Cloudflare
Updated Improve ionCube Loader

Version: 1.1.1 Released (11/25/2022)
Maintenance

Fixed: Support PHP 8.1
Removed: Remove Support for PHP 7.2 to 7.3
Removed: Remove Support for WHMCS V8.2 to 8.3

Version: 1.1.0 Released (08/15/2022)
Minor

Added Disable registration for restricted countries

Version: 1.0.2 Released (03/16/2022)
Maintenance

Fixed the Issue with javascript error in a subdirectory
Updated About page

Version: 1.0.1 Released (11/18/2020)
Maintenance

Fixed Problem with WHMCS v8
Updated Remove v4 Admin theme from distribution
Updated Remove boxes order form template from distribution
Updated Remove modern order form template from distribution
Updated Remove Support for PHP 5.6 to 7.0

Version: 1.0.0 Released (05/29/2020)
Stable

New Initial Release

Installing Email 2FA is very simple. The following steps will guide you through the process:

1 - Upload the entire folder to your website - if you experience problems, try uploading in binary mode. However, do not upload the “upload” folder, just the files inside of it!
2 - Login to the admin area, go to Configuration > System Settings > ADDON MODULES
3 - In the Addons page, you will see the Email 2FA click activate, then click configure to see the options
4 - Check the Full Administrator box in the Access Control, then click Save Changes
5 - To set the module to go to Addons > Email 2FA
6 - To enable Two-factor Authentication then please go to Setup -> Staff Management -> Two-Factor Authentication on the navigation bar at the top of WHMCS
7 - Scroll down to 'Email Two-Factor Authentication' and click the 'Activate' button
8 - Tick the 'Enable for clients' if you want clients to be able to use this
9 - Tick the 'Enable for staff' if you want staff to be able to use this and enable Force Administrator Users to enable Two Factor Authentication.
10 - Click the 'Save Changes' Button
11- You can edit the email template. Go to Setup > Email Templates, and then you will find 2 templates
WS Client Two-Factor Authentication
WS Admin Two-Factor Authentication

Version: 2.0.1 Released (10/09/2026)
Maintenance

Added: separate PIN and Email subtabs and tables to User Logs and Admin Logs.
Added: optional legacy migration, table preservation, and a separate migration verification page.
Updated: Removed the User column and added Main Account/Sub Account labels.
Updated: Widget totals to include main users and subusers, removed the cache delay, and corrected PIN/Email links.
Updated: Retained the original pin and email provider names.
Updated: Corrected admin provider checks to use authmodule.
Updated: Support WHMCS 8.13.x, 9.0.9 & 9.1
Updated: Support ionCube Loader v15
Improved: Subuser logging and prevented duplicate active entries.

Version: 2.0.0 Released (10/05/2026)
Stable

Added: WHMCS dashboard widget showing clients with 2FA, clients without 2FA, clients using Email 2FA, and clients using Pin 2FA.
Added: User Logs and Admin Logs for 2FA security: Email 2FA and PIN 2FA records.
Added: Delete Logs action for removing old log records before a selected date.
Added: Bypass Clients management.
Added: User Logs now show the actual client user as well as the linked client account, including Pin records stored with either user or client type.
Added: Change logging when users disable or re-enable Email 2FA or Pin 2FA.
Added: WHMCS CSRF tokens to Email 2FA and Pin 2FA login challenge forms.
Updated: addon and security module versions to 2.0.0.
Updated: Prevents login errors if the IP-trust table was removed by recreating ws_iptrust2fa_ip before updating or reading last-login data.
Updated: Email 2FA now recreates the required WHMCS two-factor email templates before sending a code if they are missing.
Updated: The About page styling to match the Brevo Integration layout.
Fixed: User/Admin Logs now only show the currently active 2FA method and clear the other method when switching between Email 2FA and Pin 2FA.
Fixed: Provides fresh Email 2FA and Pin 2FA security providers under security/email2fa and security/pin2fa.
Fixed: The About page module version card now shows the local 2.0.0 version and aligns its button with the other cards.

Version: 1.1.8 Released (06/05/2026)
Maintenance

Fixed: the licence system with Cloudflare

Version: 1.1.7 Released (06/01/2026)
Maintenance

Added: Allowing the admin to bypass Email Two-Factor Authentication (2FA). The admin can specify the number of days for the bypass.
Added: When a user login with a username and password, they will complete Email 2FA once. After that, if they login again from the same IP, the 2FA step will be bypassed for the specified number of days.
Added: Support for the WHMCS "Nexus" theme
Improved: The License System
Improved: Help Page
Updated: Support WHMCS 8.13.x & 9.0.x
Updated: Requires ionCube Loader v14
Fixed: Undisclosed Security Fix
Removed: Support for WHMCS V8.11.x to 8.12.x
Removed: Support for PHP 8.1

Version: 1.1.6 Released (08/20/2025
Maintenance

Added: Functionality to prevent 2FA code emails from being sent to the address specified in WHMCS Global BCC (Settings -> General Settings -> Mail -> BCC Messages)
Fixed: PHP Bug
Removed: Support for WHMCS V8.9.x to 8.10.x

Version: 1.1.5 Released (06/18/2025)
Maintenance

Added implemented functionality to fetch and display the 2FA method on the admin side under the client's user tab
Updated Support WHMCS 8.12.x & 8.13.x
Fixed an issue on the Lagom 2 Theme showing two Login buttons
Updated Remove Support for PHP 7.4
Fixed Lang File

Version: 1.1.4 Released (09/17/2024)
Maintenance

Added Admin Log
Fixed Client Sub User
Fixed Licence System
Updated Support WHMCS 8.10.x & 8.11.x
Updated Help Page

Version: 1.1.3 Released (03/17/2024)
Maintenance

Added IP Address and Hostname, merge fields when the e-mail is sent
Fixed the issue with the Client and User ID, now only the User/Admin ID is used
Updated Remove Support for WHMCS V8.6.x to 8.7.x

Version: 1.1.2 Released (02/10/2024)
Maintenance

Fixed Lagom 2 Themes
Fixed Lang File
Fixed support for ionCube Loader v13
Fixed Support WHMCS 8.9
Updated Help Page
Updated the License System
Updated Improve ionCube Loader
Updated Remove Support for WHMCS V8.4.x to 8.5.x

Version: 1.1.1 Released (02/24/2023)
Maintenance

Fixed language variable created
Fixed PHP 8.1 Issues

Version: 1.1.0 Released (02/18/2023)
Minor

Added Resend OTP Button
Fixed support for ionCube Loader v12 and PHP 8.1
Fixed work with WS Client Username module
Updated Remove Support for PHP 7.1 to 7.3
Updated Remove Support for WHMCS V8.1.x to 8.3.x

Version: 1.0.2 Released (06/07/2022)
Maintenance

Added Sub user's Admin link
Updated admin area about page
Updated Remove v4 Admin theme from distribution
Updated Remove Support for PHP 5.6 to 7.0
Updated Remove Support for WHMCS V7.10 and previous
Fixed issue with email template words

Version: 1.0.1 Released (11/11/2020)
Maintenance

Fixed WHMCS v8
Updated Remove v4 Admin theme from distribution
Updated Remove Support for PHP 5.6 to 7.0

Version: 1.0.0 Released (01/22/2020)
Stable

New Initial Release

You need to log in to the admin area, go to Configuration > System Settings > Search Client Group, and click on it. Then create to some, see screenshot



Then go to the MailerLite module, click on Client Groups, and select the section that you would like to add

Installing MailerLite is very simple. The following steps will guide you through the process:

1) Upload the entire folder to your website - if you experience problems, try uploading in binary mode. However, do not upload the “upload” folder, just the files inside of it!
2) Login to the admin area, go to Configuration > System Settings > ADDON MODULES
3) In the Addon Modules page, you will see MailerLite; click Activate, then click Configure to see the options
4) Check the Full Administrator box in the Access Control, then click Save Changes
5) Open the MailerLite addon. Enter a MailerLite Connect API token; the setup wizard retrieves the available MailerLite groups.
6) Activate the API key. Click here, then click on Developer API
7) Make sure, before you add the API key, you set up the Subscriber groups here, or the key will not work.
8) Optionally import WHMCS clients that are already opted in to marketing. The initial import does not import clients without recorded marketing consent.
9) Make sure you enable Marketing Emails from General Settings > Other

Import Guest Client Tickets: adds the email address from a ticket opened without a WHMCS client account to the default MailerLite group.

How To Create Groups

Version: 2.0.0 Released (08/20/2026)
Stable

Added a dedicated internal MailerLite API client.
Added: Mapping page contains mapping records only and links back to Dashboard > Settings for mapping behaviour.
Added: Webhook Integration
Added: Import totals are built only from the same strict opted-in client query used for the import itself.
Updated: Major rebuild and modernisation of the MailerLite integration.
Updated: The addon from the legacy MailerLite API implementation to the current MailerLite Connect API.
Updated: PHP 8.2 or later is now required.
Updated: PHP cURL is required for MailerLite API communication.
Updated: Removed support for PHP 8.1
Updated: Removed support for WHMCS V8.11.x
Fixed: Initial client import is strictly limited to tblclients.marketing_emails_opt_in = 1.
Fixed: Legacy emailoptout is never treated as affirmative marketing consent.
Fixed: Restores the original Dashboard main navigation label and Overview submenu.
Removed: The bundled legacy MailerLite PHP SDK and Composer vendor dependencies.

Version: 1.1.7 Released (06/08/2026)
Maintenance

Fixed: License system with Cloudflare
Fixed: Support for WHMCS 9.0.x

Version: 1.1.6 Released (03/11/2025)
Maintenance

Fixed License System
Fixed support for WHMCS 11.x & 12.x
Fixed import of guest client tickets

Version: 1.1.5 Released (11/22/2024)
Maintenance

Fixed support for PHP 8.3
Fixed support for ionCube Loader v14
Updated rewritten Hook
Updated Remove Support for PHP 7.4
Updated Remove Support for WHMCS V8.6.x to 8.9.x
Updated to Support WHMCS 8.11.x

Version: 1.1.4 Released (01/31/2024)
Maintenance

Fixed custom field API
Fixed support for ionCube Loader v13
Updated the License System
Updated Improve ionCube Loader
Updated to Support WHMCS 8.9

Version: 1.1.3 Released (08/24/2023)
Maintenance

Fixed Issues with non-subscribers in the admin section
Fixed ionCube Software
Updated Remove Support for WHMCS V8.4.x to 8.5.x

Version: 1.1.2 Released (11/25/2022)
Maintenance

Fixed Support PHP 8.1
Fixed Issue with subscribe still active after removed
Updated Remove Support for PHP 7.2 to 7.3
Updated Remove Support for WHMCS V8.2.x to 8.3.x

Version: 1.1.1 Released (10/22/2022)
Maintenance

Fixed Issue with MailerLite API changes
Fixed Issue with WHMCS default mail OPT
Updated Remove Support for PHP 7.2.to 7.3
Updated Remove Support for WHMCS V8.1.x

Version: 1.1.0 Released (06/06/2022)
Minor

Added Products, Zip code, Country, and State in custom fields Integration
Added Import guest client's tickets
Added Multi-client groups
Added List stat feature

Version: 1.0.0 Released (08/08/2019)
Stable

New Initial Release